AMERICOMP Elevator Table X-Ray System

Panerai Luminor 1950 Replica

The x-ray equipment AM1 represents an economical choice for high performance imaging that features the highest quality lift mechanism designed for effortless patient transfer and positioning. The AM1 system includes an elevating float top table that provides an elevation range of 22 1/2” to 34” (57 cm to 86 cm) for effortless patient transfer. It is very well suited for immobile, pediatric or geriatric patients. The smooth, quiet lift mechanism and high capacity motor safely handles patients weighing up to 400 lbs. (182 kg). This mechanism, operated by a convenient foot treadle, frees your hands and prevents the table from being inadvertently activated by the patient

Complement the AM1 radiography system with a high quality, state-of-the-art Spectra High Frequency Generator that delivers the benefits of reduced patient exposure, maximum diagnostic image quality and extended tube life.

Some of the features of this Spectra generator series:

  • 50, 40, 30 and 20 kW power ratings
  • Anatomical or manual technique selection
  • Automatic exposure control option

duangwatch The AM1 radiography equipment is completely compatible with most digital imaging systems. Digital imaging technology may be added at any time.

  • X ray equipment compatible with Computed Radiography units (CR), flat panel detectors (Direct Radiography - DR) and films
  • Orthopedic tubestand glides smoothly behind the table on precision bearings that travel on wear-resistant steel tracks.
  • X-ray equipment with generous track lengths are provided so that the tube stand can extend beyond the table at either end for off-table procedures.
  • The tube carriage also provides a transverse motion mechanism that enables the operator to position the tube +/- 5" off-center of the table midpoint. A centering detect facilitates precise re-positioning of the tube.
Select  a High Frequency Generator
  • Spectra Series: 20kW, 30kW, 40kW, 50kW
Elevator Table
  • Four-way float-top table with foot treadle control
  • +/- 5” transverse travel, 32” longitudinal travel
  • 84” x 30” table top, variable table height, 22” to 33”
  • Foot treadle operation of table top and height movements
  • Grid cabinet with electric lock, 22” travel
  • Grid: 8:1 ratio, 103 LPI
  • Regular-duty cassette tray
  • 400 lb. rated patient load
Transverse Rotational Tube Stand
  • Floor-to-wall or floor-to-ceiling mount with 8 ft. rails
  • Rotational base, +/- 180 degrees with 90 degree detents
  • Transverse tubearm +/- 5”, platform tube mount
  • Angulation dial, operator handgrips, and electric locks
  • 92.5” minimum ceiling height
  • Floor-to-wall or floor-to-ceiling mount
  • 11.9” minimum (focal spot to floor), 73” maximum vertical travel
  • Operates on 24 VDC
Wall Stand Package
  • Counterbalanced column, floor-to-wall mounted
  • Grid cabinet, 17” x 17”
  • Grid: 8:1 ratio, 103 LPI
  • Regular-duty cassette tray
  • Electric lock
  • External 24 VDC power supply
X-Ray Tube
  • 1.0 – 2.0mm focal spots, 140,000 heat units
  • 0.6-1.5 mm focal spots, 200,000 heat units, specify shoot left or right (with 40kW generator only)
  • 0.6 – 1.2 mm focal spots, 300,000 heat units (with 50 kW generator only)
Cables
  • 20 ft. high voltage cables with federal terminations
Collimator
  • Certified manual collimator with light field and swivel mount