AirDR - Wireless Cesium Flat Panel Detector
The AirDR is a durable, low-dose cassette-size DR panel loaded with cutting edge, fail-safe features while ensuring patients receive the lowest possible dose. This Flat Panel Detector uses a low-power WiFi connection to transmit images, allowing you the freedom to capture difficult or unusual x-ray projections. With a thin and sturdy carbon fiber frame and wireless capabilities, it can be seamlessly integrated into new or existing x-ray rooms. Rugged and reliable, the AirDR has achieved a high Water and Dust rating of IP42 to protect it from outside dust particles, and if accidentally wet, it is engineered to protect the panel and prevent the circuits from shorting out.
- No need to modify your generator, or bucky
- No need to replace your grids
- No need to discard your wall stand, or table.
- Water and Dust Resistant IP-65 Rating
- Carbon Fiber Construction Durability
- Same Day Installation
- XC touchscreen acquisition software is powered by ICE-3 an upgraded processing algorithm to that enhance visuals, maximize resolution, and offer advanced evaluation tools for image manipulation. ICE-3 automatic image processing package increases visualization of fine-line detail and soft-tissue contrast. The Smart Smoothing™ technology improves image quality while preserving diagnostic detail for thicker body parts.
- The AirDR is a 100-micron, direct deposit Cesium, flat-panel detector. The detector transmits images to the acquisition station through a WiFi connection, eliminating the need for a hard wire. If WiFi is unavailable, a back-up cable connection can be used. Powered by a Cesium Iodide Scintillator, the detector delivers high-resolution images at the lowest possible dose.
- The AirDR is a lightweight digital radiographic system designed to optimize workflow, increase throughput, and eliminate unnecessary exposures to patients. Its durable frame and wireless capabilities allow you complete imaging freedom for even the most difficult image projections. Using advanced acquisition software, the AirDR allows you to achieve unprecedented workflow and save valuable time.
- Single-Sensor Detector. Other panels on the market can have as many as 5 separate sensors and the panel relies on these sensors to work in concert to acquire an image. Multi-sensor panels are often vulnerable to failure points between sensors, which can cause "no triggers" and "false triggers" during a routine study and ultimately lead to unnecessary repeat exposures for patients.
- Panel: Amorphous Silicon active TFT/diode array
- Scintillator: Direct deposition CsI:Tl
- Pixel Matrix: 3556 x 4320
- Pixel Pitch: 100 μm
- Amplifiers: Low noise ASICs with user selectable gains
- ADC: 16 bit
- Image Transfer Time: Wired/500 ms, Wireless/3000 ms
- On Board Memory: 1 GB DDR3 (on-board), 4 GB SDHC card (upgradeable)
- Size: ISO 4090 cassette size 14” × 17" (35cm × 43 cm)
- Active area: True 35.5 cm × 43.2 cm
- External dimensions: 38.4 cm (w) × 46 cm (l) × 1.5 cm (h)
- Weight: 8.4 lbs (3.8 kg)
- Housing: Carbon-fiber construction
- Status Display: LED display (Wifi/Battery/Sensor)
- Wireless Data I/F: 802.11n WiFi standard
- Wired Data I/F: GigE via optional power & communication tether
- X-ray I/F: Automatic Exposure Detection (AED)
- Limiting resolution: 5 lp/mm
- Typical MTF: 70% (1 lp/mm), 40% (2 lp/mm), 15% (4 lp/mm) for RQA5
- Typical DQE: 75% (0 lp/mm), 60% (1 lp/mm), 40% (3 lp/mm) for RQA5
- Temperature: 10 - 35 °C operating
- Humidity: 30 – 70 % RH operating (non-condensing)
- Battery: Rechargeable battery, 53.3 Wh
- Battery charger: External two bay charger 100-240 V AC 50/60 Hz
- Interface and Power Unit: Optional AirDR IPU with external power supply 100-240 V AC, GigE, and X-ray I/F
- Standards: IEC 60601-1, IEC 60601-2, IEC 60601-1-6, FCC 47CFR PT 15, FCC OET 65C, ETSI EN 301 893, EN 62311, ISO 10993-5, ISO 10993-10, CE